Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.

Table of Contents

Can you just buy the tank of a toilet?

Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you’re done.

Do all toilet tanks fit all toilets?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.

How much is a tank toilet?

The average price for Toilet Tanks ranges from $40 to $2,000.

How do I know what Tank to buy for my toilet?

Look for the manufacturer name or a number on the bottom side of the water tank lid. It may be stamped into the lid or painted on – some of them may even be handwritten if the tank lid was replaced by a plumber with foresight.

👉 For more insights, check out this resource.

What is the tank on a toilet called?

Tank Lid – It’s the top most part of your toilet tank and covers the mechanisms inside your tank. Bowl – The bowl is the lower half of the toilet used to hold liquid and solid wastes prior to flushing. Water Spot/Sanitary Seal – This is the water surface that you see inside the toilet bowl after the flush is completed.

How do you replace a toilet tank?

  1. Step 1: Disconnect the Toilet from the Water Supply. …
  2. Step 2: Drain the Water from the Toilet Tank. …
  3. Step 3: Disconnect the Supply Hose on the Toilet Tank. …
  4. Step 4: Extract the Bolts on the Toilet Tank. …
  5. Step 5: Detach the Tank from the Toilet Bowl.

Can you repair a cracked toilet tank?

Any hairline cracks below the waterline will require a bit of patching with epoxy. Larger cracks below the water line means the toilet needs to be replaced entirely. While a patch can be done DIY, it is always best to consult with a professional plumber.

What causes toilet tank to crack?

What causes toilet tank cracks. The most common causes of hairline cracks are impact, age, and accidents. While tanks are generally sturdy, an impact with a heavy object or a person can cause a small hairline crack that expands over time.

👉 Discover more in this in-depth guide.

Are all toilet tanks standard size?

Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.

Article first time published on

Can you mix toilet tanks?

It is unlikely that tanks will be interchangeable if you replace a toilet tank with one from a different manufacturer. Problems with mismatched tanks and bowls include hardware not lining up and poor balance on the bowl. Even if the bolts line up, the new tank may leak or be wobbly.

Can you mix and match toilet bowl and tank?

There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.

How much do toilet tanks weigh?

What’s the Average Toilet Tank Weight? Toilet tanks also vary in weights, just like toilet bowls. A toilet tank weighs 1/3 to 1/2 the bowl’s weight, which is about 25-40 pounds.

How do I know if my toilet is a 10 or 12 rough?

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.

Are toilet tank bolts universal?

Are Toilet Tank Bolts Sizes Standard? Toilet tank bolts help to seal your toilet tank such that it does not leak. They are durable and often in the same sizes and lengths. More often, toilet tank bolts are standard and will fit most types of toilet tanks.

How wide are toilet tanks?

The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches.

How much is a new toilet?

National Average Cost$170Maximum Cost$329Average Range$150 to $180

Is toilet tank water clean?

Never? Same. The toilet tank is one of the most overlooked spots in the bathroom when it comes to cleaning. While the water in the tank is clean since the lid keeps out bacterial and mineral buildup along with dirt, metal parts can corrode and rust.

What's inside toilet tank?

There are really only two main toilet tank parts: The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush. … Look at the overflow tube to determine which toilet valve is causing the trouble.

Do toilets crack with age?

Cracks From Age The older the cracked toilet, the less efficient it is and the more prone it is to cracking. And if there is a major temperature difference between the air outside the toilet and the water inside the tank, cracks will be more likely to develop, especially in older toilets.

How do I know if my toilet tank is cracked?

  1. The bowl won’t stay full. If the crack is in the bowl area, you may notice the water level constantly going down.
  2. The tank won’t fill. Just like a cracked bowl, a cracked tank also won’t fill properly.
  3. Water on the ground. If the water isn’t in the toilet where is it?

Should a cracked toilet be replaced?

If there are any cracks inside the bowl, the whole toilet must be replaced. This is because the bowl bears all of the weight of not just the toilet, but anyone using it. This could cause serious injury and damage to the bathroom if it’s not replaced. A qualified plumber can replace the toilet easily.

Can I use Flex Seal on a toilet tank?

Not only can it prevent leaks but it can make your tub, shower and areas around your toilet look better. Luckily, we help make the job a little easier. Flex Shot is easy to use, with no caulk gun required. It also forms a rubber-like seal that actually repels water.

How do you fix a crack in a porcelain toilet?

  1. Step 1: Locate the Crack. Identify the crack that you want to repair. …
  2. Step 2: Shut Off the Water Supply. …
  3. Step 3: Flush the Tank. …
  4. Step 4: Clean the Cracked Area. …
  5. Step 5: Drill Through the Porcelain. …
  6. Step 6: Widen the Crack. …
  7. Step 7: Fill the Crack With Epoxy. …
  8. Step 8: Sand the Cured Epoxy.

Can a toilet bowl crack on its own?

Toilet Crack Causes. … Cracks from DIY Projects: As durable as porcelain may seem, the average DIY repair could easily lead to a damaged toilet. Even something as simple as over-tightened bolts can crack the tank. Furthermore, when placing the tank lid back on the toilet, remember to lay it down gingerly.

How deep is a toilet tank?

Toilets have many standard measurements, including height, width and depth or length. The width is 15 inches, height is just over 18 inches and the depth is 18.9 inches. The toilet tank is typically 10 inches wide (from the front to the back) and around 26 inches wide.

How tall is an average toilet tank?

Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches. This is one reason why partitions around ADA-compliant bathrooms are different.

How tall is a standard toilet tank?

The newest and most popular comfort height is typically around 16 1/8” floor to rim. The standard ADA (Americans with Disabilities Act) height toilets must have, a 17”-19” floor to bowl rim height, including the seat. You should also consider the toilet rough-in from the wall, which is commonly 12”.

Can you put a new cistern on an old toilet?

So for some people, the answer to can you just replace the cistern on a toilet is a yes, but if you have any doubts it makes a lot more sense to bring in the experts so that there are no errors that might end up costing you even more.

Does Eljer still make toilets?

Today Eljer® continues to offer innovative toilets as well as beautiful and functional bathtubs, whirlpools, and air baths.

How can I tell what model my Gerber toilet is?

The model number for Gerber toilet tanks is located on the back wall inside the tank, near the water line. You will also be able to find cast date and the bar code and serial number (D & S Code).